How to buy used cars

In today's age of having to get things done easy and fast, a car is a necessity. Apart from manufacturer's, the used car market has also grown in the past decade. But buying in the second-hand market is far trickier than choosing a new vehicle. There are a number of variables to consider and getting the right valuation is tricky. Here are a few things to keep in mind while buying a used car.

        THE ENGINE
    Start with the obvious. Checking the car's engine is first and foremost. Take a mechanic along when you look at the available options. The number on the odometer, by itself, might not indicate the extend of wear and tear to an engine.

    TEST DRIVE

    Take the cars you like for a test drive. If you're an experienced driver, this will help detect any obvious problems. Pay attention to suspension, ease of driving, noises from the engine, apart from the obvious such as steering, brakes and gears.

    Also, some drivers feel at ease with certain cars for reasons that might not be apparent. A test drive will help in making sure that a car meets your requirements. Again, it's advisable to let your mechanic tag along on the test drive as it never hurts to get a second opinion.
  
 

  MAINTENANCE

    With a bit of luck, you can find a car that has been well maintained. Even if you have to spend a little effort and time, hunt around for a vehicle that has been treated well.

    It is a safer bet to go for a car from a manufacturer with established service networks and dealers. In the long run, it will be easier, and cheaper, to get the car serviced and buy spare parts.

    Moreover, authorised dealerships often offer a warranty on certified used cars. Avoid models that have gone out of production to avoid problems with getting spare parts. Also, older cars are more likely have maintenance issues.
  
       SERVICE HISTORY

    Do go through the car's service log. This will tell you whether the car has been serviced at regular intervals and, more importantly, if it has been involved in accidents or has had a major mechanical fault. A thorough service log indicates how well the car has been maintained.

    DOCUMENTATION

    After you have done your research, it's time to check the documents. These include the original registration papers (RC book), a valid Pollution Under Control (PUC) certificate, insurance papers and tax tokens. You should not buy a car unless all of the above can be provided by the previous owner.


   NEGOTIATING THE DEAL

    Once you've established that everything is to your satisfaction, negotiate a deal. Be confident of the price of the car when bargaining with the dealership. Negotiate hard for a discount in the used car market. Of course, do have an idea about a fair price that you are willing to pay.

    On the flip side, if the dealer volunteers a discount that is too good to be true, then double check the car and the documents. If you do suspect that something is wrong, do not hesitate to withdraw from the deal, irrespective of the dealer's sales pitch. This is a long-term buy, so choose carefully and complete the transaction only after you are completely satisfied.
 
  
 BUYER'S CHECKLIST

    Identify the models with the best resale history

    Get the engine checked by your mechanic

    Test drive the car, do not buy unless you've driven it

    Scrutinise the car's service log

    Ensure that the car has all original documentation

    Buy from authorised dealer

  
 QUICK TIPS

    1. Check the engine and ensure that it has not been rebuilt

    2. Check for abnormal noises from the engine during the test drive

    3. Look out for abnormal wear and tear of the wheels, including the spare

    4. Ensure all electricals, including headlights, indicators, telltale lamps are working

    5. Also look for dents, variation in body paint or damage to the car's body
   


Did you know all the parts in this car were printed in a 3D printers.
    Car

    URBEE was first car with all its body parts printed with 3D printers; the first prototype was completed this year. The designers are currently working on the second-prototype, aiming to have the new model ready for demonstration in 2015. The second vehicle will be a 2 passengers car with all its interior and exterior parts created with 3D-printers. The vehicle will run on bio-fuel, and able to travel from New York to San Francisco in 2 days with 10 gallons of fuel.
    To check out more creations via the 3D printer click next

 

1 comment:

  1. There are many person who want to buy used car and think that i should collect information before buying used car to any experienced person, this article will surely helpful for suck kind of people, keep it up..

    How to buy used BMW engine

    ReplyDelete

Blog Archive